Please complete the re-captcha below to view this document.

Know what you’re looking for?

DK 12/14/16/18 Overview

Product unavailable online, please call 01536 262 769 to purchase


WEKA professional electric drills offer a high quality standard combined with a maximum in efficiency.
They are designed for permanent and professional operation. They are designed for steady and
professional use and achieve a high quality level.

The DK16 is a well approved and from professionals worldwide appreciated core drill. In Europe, USA and
Asia it is used from drilling and sawing companies, but also from craftsmen, who prefer a high-quality

DK16 - universal diamond core drilling machine which can be fixed in a drill stand or used as
a hand held drill.

DK18 - standard diamond core drilling machine for operation in the drill stand.
The DK16 and DK18 are characterized by their enormous drilling capacity and thus the wide drilling range
of up to 160 mm.

All versions offer the following features.

3 - speed gear

Large drilling range (see tech. Data) with easy speed adjustment to each hole diameter.

Oil-bath lubrication
Optimal gear lubrication for high efficiency and durability.

Overload clutch
Protection for operator as well as for machine and tools against mechanical overloads.
An indispensable safety element for hand operated core drills.

Motor protection switch
Protects the motor against electrical overload.

Intellitronic - the new electronic system starts the motor by means of a micro controller softly and thus avoids a too high start current. When exceeding the over current threshold the electronic is showing this by a pulsating of the motor. If the operator now decreases the feed power, the motor works normal again. If the operator does not decrease the feed power the electronic switches the motor off after some seconds. After this action the motor can be
started immediately. It is not required to wait a time period before starting again like on a thermal motor overload switch.Thus the Intellitronic avoids overload conditions and increases safety, the operators comfort and the motors life time.

Leveling aid
Two integrated levels enable exact horizontal and vertical working positioning.

Metal Casing
In relation to plastic cases the aluminum case of WEKA drills is mechanically and thermally more stable and

WEKA and Environment
WEKA electric tools are mainly made of steel and aluminum. Plastics are only used if it is unavoidable.
Sandwich material is not used.
WEKA electric tools are durable. Scrap-mature machines will be taken to pieces completely and the
material is separated.
Therefore the machines are 95% full recyclable.

Electrical Safety
WEKA diamond core drills correspond to the newest European regulations. The most important features are double insulation with an additional ground wire, that protects most of all against external voltage - drilling into a live line - and a residual-current-operated protective device (RCD) in the cord.
Threefold electrical protection - safety insulation + earth wire + protective switch


For more information about this product, call or email us: 01536 262 769


  • DK 12/14/16/18 Overview
  • DK 12/14/16/18 Exploded Drawing
  • DK 12/14/16/18 Spare Parts Price List


Send a message

Any Queries? Don't Hesitate!

[email protected]

Give us a call

Any Questions? Don't Hesitate!

01536 262 769

Connect with us

Feel free to follow us!

Our Social Media

Know what you’re looking for?