CF - 400 Easy Cut - Small Saw with BIG Cutting Depth

The compact joint cutter for cutting work in asphalt, concrete and similar abrasive building materials, especially in confined or difficult to access areas.

• Extremely easy to transport due to compact design and low weight

• Stepless cutting depth adjustment via swivelling lever with depth indicator

• Ergonomically designed, height-adjustable and low vibration mounted push handle

Water supply via water tank or pressurised water

• For extra long cutting periods it is possible to mount a second water tank – up to 44 l cooling water can be used

Technical data and equipment features

Drive Motor - G200F LC Loncin air-cooled, 1-cylinder, 4 stroke, petrol

Power Output - 4.1 kW / 3600 rpm

Cubic Capacity - 196 cm3

Engine ignition device - Reversing starter with pull rope

Fuel Tank Capacity - 3.61 l

Fuel consumption at continuous output - approx. 1.7 l/h

Feed -  Manually via adjustable, vibration-damped push handle

Diamond saw-blade receptacle - left

Diamond saw-blade support tap Ø - 25.4 mm (with central hexagon clamping nuts SW 24)

Max. diamond saw-blade clamping width - 10 mm

Driving pin Ø - 8 mm

Cutting shaft speed - 2240 rpm

Diamond saw-blade Ø - 350 mm – 400 mm

Max. cutting depth - up to 140 mm

Dimensions and weight

Total weight - 

approx. 62 kg (without diamond saw blade and water)

approx. 87 kg (with diamond saw blade and water)

Length x width x height

Transport: approx. 1030 mm/ 520 mm/ 990 mm

Ready to work:approx. 1730 mm/ 520 mm/ 1140 mm

Water tank, water filling quantity - removable, upto 22 litres

Optional second water tank - removable, up to 22 litres